Interior Solid Wood Panel MDF Veneer Door Skin
Home » Products » Showroom » Interior Solid Wood Panel MDF Veneer Door Skin

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Interior Solid Wood Panel MDF Veneer Door Skin

JHK-007, Low cost bubinga wood panel price veneer door is a kind of composite door, which not only has a natural woods, but also the price is very affordable. The veneer door is including 3 part: 2 door skin at surface and wood skeleton in the middle.
Quantity:
With quite a few factories, we can easily provide a wide vary of 2 Panel MDF Wood White Primer Door, New Design Plastic Glass ABS Door, Hot Press Compressed White Primer Door. Quality is the basic element of a company's operation and development and the core to ensure the quality of products is technology. Our company takes the customer as the center, pursues the product and the service and satisfies the customer's actual demand and the potential demand. We firmly believe that as long as we take the scientific development concept and market as the guidance, the innovation as the driving force, the quality of survival, constantly innovate, we will certainly win a better tomorrow!

JHK-007 Low Cost Wood Panel Price Veneer Door

JHK-007, Low cost bubinga wood panel price veneer door is a kind of composite door, which not only has a natural woods, but also the price is very affordable. The veneer door is including 3 part: 2 door skin at surface and wood skeleton in the middle. The surface not only the Oak and Teak, but also Sapele and Walnuts. Our more than 200 sets of molds is enough to meet requirements of pattern from different families in different countries. JHK strives to provide the top-quality products with reasonable prices, efficient production time and the most professional service. JHK always focuses on customers’ needs and therefore provides tailored products and approaches client actively to solve any problems they have.

The veneer color is selected carefully and strictly, which can look more consistent. It is like solid wooden door with the economical price. Ready to customize and paint.

Veneer door 0

02

02(2)

02(3)

03

04

05

Door pocket installation

1. The assembly joint of the door pocket shall be tight, flat and without black seam; the fixed accessories shall be locked; the diagonal line of the door pocket shall be accurate, and the allowable tolerance within 2 meters shall be ≤ 1 mm, and that over 2 meters shall be ≤ 1.5 mm;

2. After the door pocket is installed, it should be three-dimensional horizontal and vertical, the allowable tolerance of perpendicularity is + 2 mm, and the tolerance of horizontal flatness is + 1 mm; the combination between the door pocket and the wall should have fixing screws (no less than 3 per meter); the door pocket width should be more than 200 mm, and the fixed iron sheet should be installed; the gap between the door pocket and the wall should be sealed with foam rubber on both sides, and the foam adhesive should be evenly coated and cut flat after drying.

Sleeve installation

1. The sleeve line installation should be evenly coated with glue and fixed with the door pocket and wall. The socket line interface should be flat, tight and seamless. After installation, the same side of the line should be in the same plane. Because the wall is not smooth, the socket must be smooth. The allowable tolerance of sleeve curve is 1 mm. The gap between sleeve line and wall shall be filled with sealant.

Door leaf installation

1. After installation, the door leaf should be flat and vertical, and the door leaf should be level with the exposed surface of the door pocket; the door leaf should be opened without abnormal noise, and the switch should be flexible and free;

2. For the gap between the door pocket and the door leaf, the lower seam is 6mm and the other three sides are 2mm; the allowable tolerance of all gaps is + 0.5mm;

3. After the door is closed tightly, it is tightly combined with the sealing strip without swinging.




After years of exploration, our Interior Solid Wood Panel MDF Veneer Door Skin has condensed the world's cutting-edge technology, hoping that it will come closer to the needs of consumers. We adhere 'honest and trustworthy, mutual benefit and win-win' business principle, so that our company and business customers work together to build a strong marketing network. Our company adheres to the business philosophy of 'customer-centric, low-price and high-quality as the foundation, and customer satisfaction as the goal', and wins the trust of users with preferential prices.
Previous: 
Next: 
Follow Us
Copyrights © 2021 Zhejiang JiHengKang Door Industry Co., Ltd.

CONTACT US

Mob: +86-15605898555
Mob: +86-15669548888
Email: zjhk@zjjhk.com

QUICK LINK