Classic Wooden Door Interior Veneer Teak Wood Door Panel Inserts Designs
Home » Products » Showroom » Classic Wooden Door Interior Veneer Teak Wood Door Panel Inserts Designs
Share to:

Classic Wooden Door Interior Veneer Teak Wood Door Panel Inserts Designs

JHK-007, Low cost bubinga wood panel price veneer door is a kind of composite door, which not only has a natural woods, but also the price is very affordable. The veneer door is including 3 part: 2 door skin at surface and wood skeleton in the middle.
Quantity:
In order to protect the global environment and improve the living standard of human beings, we are actively working on the development and production of energy-saving and environmental protection Classroom Interior Wooden Door WPC Door, 12mm Depth Design Veneer Door, Natural Wooden Closet Sliding Louver Door. We have advanced production process and testing means to make our products continuously and stably meet the needs of new and old customers. We digest and absorb the latest technology, and enhance the core competitiveness of the enterprise to meet the market development and user needs. Quality is the life of an enterprise, customer satisfaction is our greatest wish. This is the best idea that our company gives you trust. We hope to stimulate the vitality of employees and promote the continuous improvement of the overall performance and capabilities of the team.

JHK-007 Low Cost Wood Panel Price Veneer Door

JHK-007, Low cost bubinga wood panel price veneer door is a kind of composite door, which not only has a natural woods, but also the price is very affordable. The veneer door is including 3 part: 2 door skin at surface and wood skeleton in the middle. The surface not only the Oak and Teak, but also Sapele and Walnuts. Our more than 200 sets of molds is enough to meet requirements of pattern from different families in different countries. JHK strives to provide the top-quality products with reasonable prices, efficient production time and the most professional service. JHK always focuses on customers’ needs and therefore provides tailored products and approaches client actively to solve any problems they have.

The veneer color is selected carefully and strictly, which can look more consistent. It is like solid wooden door with the economical price. Ready to customize and paint.

Veneer door 0

02

02(2)

02(3)

03

04

05

Door pocket installation

1. The assembly joint of the door pocket shall be tight, flat and without black seam; the fixed accessories shall be locked; the diagonal line of the door pocket shall be accurate, and the allowable tolerance within 2 meters shall be ≤ 1 mm, and that over 2 meters shall be ≤ 1.5 mm;

2. After the door pocket is installed, it should be three-dimensional horizontal and vertical, the allowable tolerance of perpendicularity is + 2 mm, and the tolerance of horizontal flatness is + 1 mm; the combination between the door pocket and the wall should have fixing screws (no less than 3 per meter); the door pocket width should be more than 200 mm, and the fixed iron sheet should be installed; the gap between the door pocket and the wall should be sealed with foam rubber on both sides, and the foam adhesive should be evenly coated and cut flat after drying.

Sleeve installation

1. The sleeve line installation should be evenly coated with glue and fixed with the door pocket and wall. The socket line interface should be flat, tight and seamless. After installation, the same side of the line should be in the same plane. Because the wall is not smooth, the socket must be smooth. The allowable tolerance of sleeve curve is 1 mm. The gap between sleeve line and wall shall be filled with sealant.

Door leaf installation

1. After installation, the door leaf should be flat and vertical, and the door leaf should be level with the exposed surface of the door pocket; the door leaf should be opened without abnormal noise, and the switch should be flexible and free;

2. For the gap between the door pocket and the door leaf, the lower seam is 6mm and the other three sides are 2mm; the allowable tolerance of all gaps is + 0.5mm;

3. After the door is closed tightly, it is tightly combined with the sealing strip without swinging.




It is based on the company's continuous innovation and progress, our Classic Wooden Door Interior Veneer Teak Wood Door Panel Inserts Designs have gradually been recognized and favored by many domestic manufacturers. At the same time, it is also sold overseas. Our development is based on the cooperation principle of 'honesty and trustworthiness, fairness and justice, mutual benefit'! We develop through multiple channels and constantly innovate in business to meet the increasing needs.
Follow Us
Copyrights © 2021 Zhejiang JiHengKang Door Industry Co., Ltd.

CONTACT US

Mob: +86-15669548888
Fax: +86-579-82212898
Email: zjhk@zjjhk.com

QUICK LINK