Two Panel Interior Teak Wood Veneer Door
Home » Products » Veneer Door » 12mm Depth Design Veneer Door » Two Panel Interior Teak Wood Veneer Door

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Two Panel Interior Teak Wood Veneer Door

  • JHK-S01-1

Availability:
Quantity:

How to Repair a Door Frame? Please see below:


Fixing a Warped Door Frame

Remove the door stop and molding. Use a chisel and hammer or putty knife to pry the door stop and molding away from the frame. Start at the bottom of the frame and work your way up.

Take care not to damage the stop as you remove it from the frame. Place the claw end of the hammer on the side of each nail to support even removal.

Remove any remaining finishing nails left in the molding.


Remove any shims from in between the door frame and the wall. Door shims are used to correct and level doors with the frame so that the door is squared, or even, between both sides of the frame. These must be removed in order to adjust the warped door frame.


Material MDF/HDF
Door Type Venner Door
Size Length: 1900mm-2150mm
Width: 600mm-1050mm
Thickness: 3mm-6mm
Depth: 8mm-12mm
Embossed: 16.8mm
Density >850g/cm3
Moisture 6%~10%
Finish Type Unfinished
MOQ 500 PCS
Payment By T/T or L/c at sight, 30% deposit and balance before loading
Shipment Within 30 days after receive the deposit
Packing Detail 30-35 PCS/Pallet, Extra Bundles are available
Term of Shipment FOB, CIF,CNF,FCA


Previous: 
Next: 
Follow Us
Copyrights © 2021 Zhejiang JiHengKang Door Industry Co., Ltd.

CONTACT US

Mob: +86-15605898555
Mob: +86-15669548888
Email: zjhk@zjjhk.com

QUICK LINK