English 
Views: 0 Author: Site Editor Publish Time: 2022-03-07 Origin: Site
Medium Density Fiberboard is abbreviated as MDF. It is made of wood or non-wood plant fibers (such as: straw, rice straw, bagasse, cotton stalk, reed, etc.) as raw materials, and the density is 0.50-0.88 after applying adhesive and hot pressing. g/cm3 high-quality man-made board. MDF is a very good material for making doors. MDF doors have also received a warm welcome in the market.
What material is the veneer door made of?
What should I pay attention to when using MDF veneer doors?
What is the future development trend of MDF veneer doors?
1. The MDF veneer door is the most widely used wooden door in modern decoration. It has the advantages of low cost, easy production and good decorative effect. The MDF veneer door is also called double-clad door and box door. It is covered with plywood, medium-density fiberboard, particleboard and other man-made boards, and the sides of the door are sealed with natural solid wood or veneer (single board). The door core material can be made of solid wood or solid wood to make the keel, or it can be made of block board. Ordinary plywood doors use wood, perforated boards, high-density boards, etc. as the door core.
2. When the MDF veneer door needs to be painted with colored paint (commonly known as mixed oil), 3mm or 5mm thick medium density fiberboard can be used as the surface material, and MDF veneer door can also be covered with five-plywood, seven-plywood, etc.; if the door needs to be painted with varnish. At the time, on the outside of the five-plywood or seven-plywood, a layer of decorative three-plywood with natural wood grain or other decorative veneer door is used.
3. When using solid wood as the keel, due to the large gap of the door core material, MDF veneer door is only covered with plywood or 3mm medium density fiberboard, the impact resistance of the door is poor, and the door panel is also prone to unevenness.
4. The sides of the MDF veneer door should be sealed with solid wood slats with the same pattern as the door panel. It is best not to use the veneer method to treat the surroundings of the door, otherwise it will affect the service life of the door, and the color of the solid wood slats for sealing MDF veneer door should be as close to the color of the panel as possible to facilitate a good decorative effect.
1. The biggest disadvantage of MDF veneer door is that it is not moisture-proof and swells when exposed to water. When using density skirting board, door cover board, window sill board, pay attention to paint on all six sides, so that it will not be deformed.
2. MDF veneer door has a large expansion rate when exposed to water, large deformation, and long-term load-bearing deformation is greater than that of homogeneous solid wood particle board. Although the moisture resistance of MDF veneer door is poor, the screws will not loosen after being tightened, and MDF veneer door is easy to fix again.
1. Structure standardization
The structure of MDF veneer doors will be standardized, so the corresponding processing technology will also be standardized.
2. Product personalization
The e-commerce model of home building materials products is developing rapidly. It emphasizes customer-centricity and realizes consumer demand for customization. After constructing the module library of each component of the MDF veneer door, consumers can combine all kinds of modular components to form a satisfactory MDF veneer door product, which can not only meet consumers' individual needs, realize the diversity of appearance, but also can meet mass production.
In general, MDF veneer doors as household products are still a very good choice. Zhejiang JiHengKang Door Industry Co., Ltd. employs more than 200 workers, through their entire staffs’ efforts, the products of high quality, widely used in a variety of architecture, has shared the broad masses of the worldwide market for over a decade.
