What are the steps of using a veneer door?

veneer door is a kind of door widely popular in the market. Because of its high quality and low price and easy installation, it has been welcomed by consumers. It is also the highest-selling door product on the market. However, many people still exist how to use the veneer door. With some questions, a brief introduction will be given below.

What is the meaning of the veneer door?

How to install veneer doors?

How to maintain the veneer door?

What is the meaning of the veneer door?

The veneer door combines the wood to form a door frame and nails the plywood on both sides of the frame. There are three veneer doors, pole wood, poplar, ash, teak, oak, and about 4 to 6 mm thick. The three veneer door can be peeled in whole or mosaic. veneer doors meet simple, smooth, clean, and hygienic requirements. However, the plywood depends on the quality of the glue. Usually, it is easy to degum when it is wet and easy to break under the sun. veneer door is not suitable for use outside doors.

How to install veneer doors?

1. Preparation tools. Before installing the veneer door, the first preparation is still to be done. So what tools should be prepared? Hammer is indispensable, as well as rulers, ropes, special firmware, connectors, etc., and some things related to the installation of veneer doors are ready, so as not to be used at that time When you can’t find it, after preparing these tools, you must check the place where the veneer door is installed, clear the powder, and see if the hole is reserved. After the corners are smoothed and the foundation is laid, you can start the installation of veneer doors.

2. Installation materials. veneer door installation materials mainly include 502 glue, wood chipping, door locks, door locks, iron nails, connectors, screws, and wall moisture barrier materials, etc., these are the basic installation materials, and they are the most complete. For the installation materials, you must prepare the preliminary work and lay the foundation for the installation of the veneer door, to prevent the veneer door from being firm and sturdy, and to ensure that there will be no problems during the use of the veneer door in the future. Bring more safety and security with your family.

How to maintain the veneer door?

1. Do not put sharp objects on the veneer door handle, otherwise, the surface of the door will be easily scratched when opening and closing the veneer door;

2. Don't open and close the veneer door vigorously, this kind of long-term impact will affect the service life of the veneer door;

3. Do not switch when there is water in your hand, because the water in your hand may flow into the keyhole when opening the veneer door;

4. When you find that the door or the door lock is not flexible when opening the veneer door, you can put a pencil lead in the corresponding part, or buy a special lubricant;

5. The room should be kept at a normal temperature and often open windows for ventilation, because the veneer door will be deformed in a humid environment, and some accessories will also rust.

All in all, if you want to renovate your house cheaply and well, the veneer door is a choice you can't miss. Zhejiang JiHengKang Door Industry Co., Ltd. has been committed to providing customers with veneer doors and perfect after-sales service so that customers can invest easily, use them with confidence, and have no wor