English 
The use of PVC doors is becoming more and more common in the market, but how to install PVC doors correctly? A brief introduction will be given below.
What are the preparation steps for installing PVC doors?
What are the process steps for installing PVC doors?
What are the final steps to install a PVC door?
1. Arrive at the site: clean up the debris and working surface on-site, ensure that there are no screws, particles, hard objects, etc., be familiar with the surrounding environment, and design a reasonable work sequence. Sort the PVC door products to be installed neatly and place them in place. Installation workers should properly protect the worksite and passages.
2. PVC door cover assembly: Arrange according to the number, confirm whether the drawing size is consistent with the actual size, and then assemble. The assembly connection should be tight and flat without black seams. The fixed parts must be locked tightly and the diagonal should be accurate. The tolerance is 3 mm within 2 meters, and 5 mm is allowed above 2 meters.
1. Confirm that the size and model of the opening and the door cover should be consistent. According to the thickness of the wall and the width of the door panel of the PVC door, locate and mark the wall. The marking should be straight and accurate. When the wall is not flat, take two points as the reference and use it as the reference plane to draw a line, and the line must be vertical. Find the pin positioning point on the line for positioning. There are no more than 2 wood pins per meter.
2. The door cover of the PVC door and the wall should be three-dimensional horizontal and vertical, with a vertical tolerance of 2 mm. The allowable tolerance of horizontal straightness is 1 mm. Fix screws should be installed between the door cover and the wall, no less than 2 per meter. The corner door cover should be equipped with a fixed iron piece. The gap between the PVC door cover and the wall is tightly sealed with wooden blocks or double-sided styrofoam. The styrofoam should be spread evenly and cut smoothly after drying. The socket interface should be flat, tight, and seamless. The thread on the same side should be on the same plane. The gap between the sleeve line and the wall is sealed with glue.
The installation of the door leaf of the PVC door should be flat and vertical, and the exposed surface of the door leaf and the door cover should be level, and the opening of the door leaf has no effect. The gap between the door cover and the door leaf is 8-12 mm on the lower side, and the remaining three sides are 3 mm. The allowable tolerance is 1 mm. After the door leaf is closed, it is tightly combined with the sealing strip and does not swing. The hinges are installed vertically and flatly, and the installation meets the requirements of PVC doors.
Seeing this, do you already understand how to install the PVC door? Do you also want to buy PVC doors? Zhejiang JiHengKang Door Industry Co., Ltd. has worked for several years to meet the need of customers from furniture retailers and renovation companies. They can create a 24-hour engineering and development environment for PVC door production.
